Membrane Treatment System¶
A proposed membrane system needs a model-specific review. Chapter 11.3 describes filtration devices that pass runoff through media, but it does not approve every product sold as a membrane system. Start with the actual NJDEP certification and NJCAT verification report. Manual 11.3, p. 1
Confirm the model, certified treatment rate, allowable flow, drainage-area limit and tested configuration. If the device is certified as an 80% TSS-removal filtration unit, evaluate both drainage area and maximum treatment flow and select the configuration that meets both. TSS means total suspended solids. Manual 11.3, p. 1 Manual 11.3, p. 5
Chapter 11.3 is the non-GI pathway: it supplies no recharge or quantity credit, and quality use follows its waiver/variance entry and the rule's selection conditions. GI-certified devices belong under Chapter 9.5. Manual 11.3, p. 1 N.J.A.C. 7:8-5.3
Use the model's required separation from seasonal high water table (SHWT); Chapter 11.3 does not supply one distance for every device. Provide watertight joints, the required structural loading capacity, safe overflow and maintenance access. Downstream connections must remain accessible for inspection. Manual 11.3, p. 3
Use the actual model's operations and maintenance instructions for service and component replacement. Include its replacement costs and access needs in selection. The chapter also requires structural inspection annually and debris/sediment inspections at least twice a year and after storms exceeding 1 inch. Manual 11.3, p. 5 Manual 11.3, p. 6
Record allowable accumulation levels and service actions. Investigate standing water if it is not an intended part of the device design. Manual 11.3, p. 6
A generic label substitutes for certification. A membrane description does not establish an approved TSS rate or size. Use the certificate for the exact unit and arrangement. Manual 11.3, p. 1 Manual 11.3, p. 3
Required service cannot be performed. Lack of access or an incomplete replacement plan can leave the device out of service. Resolve those needs before installation. Manual 11.3, p. 3 Manual 11.3, p. 5
Source chapters: January 2026 · Earlier collection. Check the date printed on the chapter when comparing editions.
N.J.A.C. 7:8-5.2(j) requires NJCAT verification and NJDEP certification of device pollutant-removal rates. This library does not assign approval to an unnamed model.
N.J.A.C. 7:8-5.3 sets the GI selection requirements and exceptions; N.J.A.C. 7:8-5.8 covers maintenance plans for major development.