2D GeneratePhase2DNonGIMTDContent
Content-authoring example. This prompt helps organize a draft; it does not establish engineering requirements. Check the governing rule edition and each chapter's printed revision, compare original pages before describing a change, and preserve units, conditions, exceptions and the distinction between binding rules and guidance. July 2023 and January 2026 are comparison baselines; later amendments and preserved approvals affect applicability.
Objective: Generate the Phase 2D Non-GI & Manufactured Treatment Device (MTD) content by analyzing relevant guidance in the 2023 and 2026 NJ Stormwater BMP Manuals.
Use the uploaded BMP manual documents as reference material.
Source Resolution:
- Resolve each required document through source_document_manifest.yaml.
- All source documents are in Sources/ (BMP_2023/, BMP_2026/, NJAC_2023/, NJAC_2026/).
- Treat the required document list below as filename-based upload targets and do not list file-system paths in the generated response.
Focus on stormwater practices that are not categorized as Green Infrastructure and on Manufactured Treatment Devices (MTDs), including how these systems are used for pollutant removal and compliance with stormwater treatment requirements.
Output: Produce a structured engineering summary suitable for a stormwater training guide.
Organize the response using the following sections:
- Overview of Non-GI Stormwater Treatment Approaches
- Role of non-GI practices in stormwater management
-
Situations where these systems are used instead of GI
-
Manufactured Treatment Devices (MTDs)
- Purpose and function of MTD systems
-
Typical treatment mechanisms described in the manuals
-
Design and Implementation Considerations
- Installation or siting considerations described in the manuals
-
Typical design documentation expectations
-
Pollutant Removal and Performance
- How these systems contribute to TSS or other pollutant reduction
-
Conceptual performance descriptions from the manuals
-
Key Updates Between the 2023 and 2026 Manuals
- Changes to how MTDs or non-GI systems are discussed
- Any updates affecting engineering review or documentation
Constraints: - Do not reference file-system operations, tool calls, or completion commands. - Assume the manuals are available through uploaded assets. - If a detail is not explicitly stated in the manuals, indicate that rather than inventing information.
Required Documents:
- 2026_BMP_11_1_Blue_Roofs.pdf
- 2026_BMP_11_2_Extended_Detention_Basins.pdf
- 2026_BMP_11_3_Non_GI_Manufactured_Treatment_Devices.pdf
- 2026_BMP_11.4_Sand_Filters_With_Underdrain.pdf
- 2026_BMP_11_5_Subsurface_Gravel_Wetlands.pdf
- 2026_BMP_11_6_Wet_Ponds_Non_GI.pdf
- 2023_BMP_11_1_Blue_Roofs.pdf
- 2023_BMP_11_2_Extended_Detention_Basins.pdf
- 2023_BMP_11_3_Manufactured_Treatment_Devices.pdf
- 2023_BMP_11_4_Sand_Filters.pdf
- 2023_BMP_11_5_Subsurface_Gravel_Wetlands.pdf
- 2023_BMP_11_6_Wet_Ponds.pdf